XtremeAIR PRO-X PX10-U30, Installation Manual & User Manual

Page: 9 / 11

www.XtremeAirUsa.com PAGE
9
3. FOR ALL ULTRA SERIES:
TYPE 3: MECHANICAL BUTTON CONTROL
4. FOR DL09 Model: TYPE 4: ELECTRONIC BUTTON CONTROL
PRO-X Series UL Series DL09-U36/42 DL09-U48
Body Design/Material Seamless Stainless Steel, Satin Finish. 1.0 mm Non-Magnetic 201 S.S
Power Rating 120V/60Hz (USA & Canada standard)
General Input Power 184W 184W 156W 308W
Motor Input Power 90W x 2 90W x 2 150Wx1 150Wx2
Ampere 1.7A 1.7A 1.3A 2.6A
Control Type Touch Screen / Touch Button (PX11) Mechanical Button Electronic Button
Levels Of Speed Control 4 Levels 3 Levels 4 Levels 4 Levels
Noise Level 1.5-6.5 sones or 33-55 dB 3.0 – 7.0 sones or 41 – 56 dB
Number Of Motors 2 Motors 2 Motors 1 Motor 2 Motors
Motor Type Single Chamber Ultra Quiet
Fan Type Centrifugal Squirrel Cage Blower
Filtration Type Heavy Duty Stainless Steel Baffle Filter
Illumination LED light, 2W Maximum
Venting Size Top, 8 inches Round
Note Specification subject to change without notice, contact your local reseller for details.
1. If the range hood or lights does not operate after installation:

Check if the range hood has been plugged in. Make sure that all power has been turned back ON.

Swap out light assembly to working ones to deter mine whether it is caused by defective bulbs.
2. The range hood vibrates when the blower is on:

The range hood might not have been secured properly to the cabinet or wall.

Check if the blower wheel is damaged.
3. The blower or fan seems weak:
12. SPECIFICATION
13. TROUBLESHOOTING
A.Make sure the range hood is unplugged or turn OFF breaker.
B.Pop out the light by pressing behind the light fixture.
C.Install new light bulb.
D.Put the light set back by pressing it in.
E.Plug in and range hood to test for operation.
A. Activating Blower Function:

Press (0) once (flashing)

Press your designed speed (1,2,3,4)
B. Active delay power shut off / turn off power:

While the blower (motor) is running, press (0) once to active 3 min power delay shut off

Press (0) again to turn off blower and power.
C. To turn the light ON/OFF & Dimmer

While the light is off, press (5) once to turn on the light

Press (5) again to turn dimmer down to lower setting

Press (5) again to turn the light off.
A. Activating Blower Function:

Press your designed speed (1,2,3)
B. Turn off power:

While the blower (motor) is running, press button (0) to turn off the motors.
C. To turn the light ON/OFF

While the light is off, press button (4) once to turn on the light.
Press button (4) again to turn the light off