Xtreme Power Conversion Corporation
XC User’s Manual
Page 8
Portable Air Conditioning
Discharge Ducts / Supply Air Duct
1.
Remove the Cool Air Outlet Hose(s) from the box
2.
Place the Cool Air Outlet Hose(s) on the front top of the unit as shown below
3.
Use screws to install the Cool Air Outlet Hose(s) to the front of the unit (screws inside the accessory box)
Cool Air Outlet attachment
Installation Guide
WARNINGS REGARDING PROPER LOCATION FOR INSTALLATION
WARNING!
DO NOT use the unit in explosive environments or in areas where flammable gas leakage may occur.
WARNING!
DO NOT use the unit in areas where it will be exposed to rain or water.
WARNING!
DO NOT use the unit in a corrosive atmosphere.
WARNING!
DO NOT use the unit above 113°F (45°C)
Moving the Unit
Unlock the casters and push the unit using the side handles to a flat, level surface and set the cater brakes to the
locked position.
Plugging in the Unit
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are present, wipe off with a
clean, dry cloth.
Check the power cord, plug, and prongs for damage or excess play.
If any damage or excess play is found, contact a qualified repair technician or a qualified electrician to perform
replacement of repair of the power cord, plug, or prongs.
WARNING!
If the power cord or plug are damaged, repair should only be performed by qualified electrical person
-
nel.
