Xtreme Power Conversion Corporation
XBDM-1520RHW User’s Manual
Page 4
Bypass Distribution Module
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
CAUTION!
Two sources of power are present in the XBDM: UPS power and Utility power.
CAUTION! (UPS has Internal Batteries):
Risk of electrical shock – Hazardous live parts inside the UPS are energized
from the battery supply even when the input AC power is disconnected.
CAUTION! (No User serviceable Parts):
Risk of electrical shock, do not remove cover. No user serviceable parts
inside. Refer servicing to qualified service personnel.
WARNING!
Unit intended for installation in a controlled environment per installation instructions.
CAUTION!
If flammable substances such as gases or fumes are present, or if the room is airtight, a hazardous situ-
ation may exist in which no electrical equipment should be operated.
WARNING!
It is strongly recommended that the XBDM not be opened as components have very high voltage and
touching those components may be fatal. Only a qualified technician or authorized agent may service the
unit.
The XBDM unit’s output receptacles can carry live voltage even when not connected to an input voltage
source. The UPS has its own internal energy source.
CAUTION!
The unit has a dangerous amount of voltage. If either the UPS or BYPASS indicator is on, the unit’s outlets
may have a dangerous amount of voltage even when not plugged into the wall outlet because the battery
from the UPS may continue to supply power.
Care should be taken to undertake installation indoors, free from electrically-conductive particles which
are under temperature and humidity control, in order to reduce the risk of electric shock.
It is best to disconnect the device using the power supply cord. Ensure that the equipment is placed in a
position near the outlet where easily accessible.
All servicing on this equipment must be carried out by qualified service personnel.
The Xtreme Bypass Distribution Module (XBDM) is intended to allow replacement of the UPS connected
without having to shut down the equipment connected to the load circuits on the XBDM. Caution should
be observed as the XBDM is always supplied with power by either the UPS or UTILITY.
