Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 49
UPS Management
• Successful link-up display:
Telnet Connection
• Initial to setup, please press “Enter” to enter telnet main screen. If the User Name and Password had
been set before, please enter actual value to access.
Telnet: Input User Name / Password
• Main screen is as follows:
NetAgent Telnet window
1. Set IP Address.
This function allows you to setup IP Address, Gateway Address, Subnet Mask parameters.
2. Set SNMP MIB System
This function allows you to set the MIB system group parameters.
3.
Set SNMP Access Control
This function allows you to set the Manager IP, Community, Access Permission.
Note: The configuration of ‘Set SNMP Access Control’ is only used for SNMP Network Manager.
4. Set SNMP Trap Notification
If you want to use a PC and perform the ‘Trap’ function of SNMP manager to manage UPS through Net Agent,
the IP address of the PC must be added in this list of Net Agent.
Note: The configuration of ‘Set SNMP Trap Receiver’ is only used for SNMP Network Manager.
5. Set UPS Properties
This allows you to setup the Communication Type of UPS, UPS Device Name and Battery Replacement Date.
