Xtreme J60 User & Installation Manual Download Page 4

Xtreme Power Conversion Corporation

J60 User’s Manual

Page 4

Uninterruptible Power Supply

Power switch on the back of the UPS. For best results, the batteries in the UPS should be charged for at least 8 

hours before use. The UPS charges its battery while it is connected to AC utility power and powered on.

Connecting the Loads

Plug the loads to be supported by the UPS into the output receptacles on the front of the UPS. Simply turn the 

power switch on the UPS on and the devices connected to the UPS will be protected by the UPS unit.

Turn UPS ON / OFF

To turn the UPS unit on, press the power button on the UPS and hold for three seconds. To turn the UPS unit off, 

press the power button and hold for one second.

Connecting Local Monitoring Software (optional)

If it is desired to use the Local Monitoring Software, and if your UPS is equipped with USB communications, con-

nect a USB cable from your computer to the UPS, and install the software from the CD.

Indicators & Alarm Conditions

Condition

Visual Indicator

Alarm

AC mode

LED illuminated

No Audible Alarm

Battery mode

LED flashes every 10 seconds

Audible Alarm sounds every 10 

seconds

Low battery mode

LED flashes every 1 second

Audible Alarm sounds every 1 

second

Fault

LED is illuminated

Audible Alarm is continuous

Alarm for over temperature protec-

tion

LED flashes every 0.5 seconds

No Audible Alarm

Important Safety Instructions: (Save These Instructions)

CAUTION! (UPS having Internal Batteries):

 Risk of electrical shock – Hazardous live parts inside this unit are ener-

gized from the battery supply even when the input AC power is disconnected.

CAUTION! (No User serviceable Parts): 

Risk of electrical shock, do not remove cover. No user serviceable parts 

inside. Refer servicing to qualified service personnel.

CAUTION! (Non-isolated Battery supply): 

Risk of electric shock, battery circuit is not isolated from AC input, haz-

ardous voltage may exist between battery terminals and ground. Test before touching.

WARNING!

 Unit intended for installation in a controlled environment.

CAUTION!

 Do not dispose of batteries in a fire, the battery may explode.

CAUTION!

 Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.

CAUTION!

 A battery can present a risk of electric shock and high short circuit current. The following precaution 

should be observed when working on batteries:

•  Remove watches, rings or other metal objects.

•  Use tools with insulated handles.

Summary of Contents for J60









Reviews: