Package contents:
• XLINK-Q unit
• 9-volt DC 110-240VAC switching power supply • Telephone cord cable
Operation
- To make an outgoing call pick up the phone connected to the XLINK, listen for dial tone and then dial
the phone number.
- To answer an incoming cell phone call wait for the telephone to start ringing and then pickup the
receiver.
- Only some cell phones will provide Caller ID information to the XLINK.
- Many flip type cell phones need to be open to function correctly.
- The XLINK may not be able to charge a very low cell phone battery. In this case use the cell phone
charger before connecting the cell phone to the XLINK.
Advanced Setup and Configuration
Please visit the product website
www.myxlink.com/q
to download the
XWizard
software and
country/application specific configuration files. These tools will allow the fine tuning of many settings
including: line reversal and polarity, dialing time, tones and alerts, telephone impedance and many
more.
Calling 911
Calling 911 using a cell phone works differently then calling 911 on a land line. In order for a call to 911
emergency services to be able to provide your exact location, E911 services must be deployed in your
area and you must have a GPS enabled and activated cell phone. See your cell phone owner’s manual
to determine if your cell phone has that feature and make sure that the feature is activated.
Cell Interference
Some cell phones have powerful radios that can cause noise in your conversation. To avoid this
interference, place your cell phone as far away as practical from both the XLINK and from the corded or
cordless telephones.
Warranty
This device has a one (1) year limited warranty. Please see www.myxlink.com/q for details.
In no event shall Xtreme Technologies be liable for incidental or consequential damages.
Safety and Regulatory
When using the XLINK, follow these basic safety precautions to reduce the risk of fire, electric shock and personal injury:
1. Read the entire manual and understand all instructions.
2.
Never connect this unit to an active telephone line. This unit is not designed to operate on the public telephone network and
should never be connected to the public telephone network.
3. Unplug this unit from wall outlets before cleaning. Do not clean the unit with liquid or aerosol cleansers. Use a dry or slightly damp cloth
for cleaning.
4. Do not use this unit near water. For example: near a bathtub, kitchen sink, bathroom sink, pool, etc.
5. Never place this unit near radiators or near a place where proper ventilation is not guaranteed.
6. Use only this power source supplied with this unit.
7. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
8. Do not disassemble this unit. Take it to a qualified serviceman when service or repair is required. Opening or removing covers may
expose you to dangerous voltages or other risks.
9. Do not use this unit to report a gas leak in the vicinity of this unit.
10.Avoid using this product during an electrical storm.
11.Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a) When the power supply cord or plug is damaged or frayed.
b) If the product has been exposed to rain or water or other liquid.
c) If the product housing has been damaged.
d) If the product exhibits a distinct change in performance.
FCC Notices
This unit has been tested and found to comply with the limits for a Class B digital device as specified in Part 15 of the FCC rules. These
limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or
radio interference even when operating properly. To eliminate interference, try one or more of the following corrective measures:
• Reorient or relocate the radio or TV
• Increase the distance between the equipment and the radio or TV
• Use outlets on different electrical circuits for the equipment and the radio or TV
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
