8
OPERATION
TRANSPORTATION
1.
As the engine warms up,gradually move the
choke lever to the OPEN position.
2.
Move the speed control lever from the LOW to
the HIGH position. When the engine speed reaches
approximately 2,300-2,600 RPM,the centrifugal
clutch engages. If the engine speed increased very
slowly,it is possible that the clutch can slip. Do not
operate the speed control lever slowly.
OIL ALERT SYSTEM:
The Oil Alert System is designed to prevent engine damage caused by an insufficient
amount of oil in the crankcase. Before the oil level in the crankcase can fall below a safe limit the Oil Alert
System will automatically stop the engine(the engine switch will remain in the ON position).
When compacting asphalt,it is advisable to paint the bottom face Of the vibrating plate with diesel fuel.
This will assist in preventing the plate from sticking to the as halt.
When shutting off the vibrator,turn the speed control lever from the HIGH to LOW position.
DO NOT
move
the speed control lever slowly.
Be sure to stop the engine while transporting. Screw up the fuel tank cap securely and close the fuel valve
to avoid fuel leaking.
If transporting by car, fix machine securely not to move nor to fall down. In case of driving for long distance
or at off-road, tank out fuel from tank.
SHUTDOWN
Set the speed control lever at the low speed position and allow the engine to run at low speed for 2 or 3
minutes before stopping.
Tum the stop switch to the OFF position. Close the fuel cock.
