Xtreme Power Conversion Corporation
XVT User’s Manual
Page 3
Uninterruptible Power Supply
Safety Instructions
ATTENTION:
To safely interact with and enjoy all the features and benefits of these Xtreme Power Conversion Un
-
interruptible Power Supplies (UPS), please read and follow all installation and operation instructions completely.
These UPS are designed to provide power protection for connected electronic equipment.
Please read this manual before installing the XVT-Series UPS models XVT-600, XVT-800, XVT-1200, and XVT-1500
as it provides important information that should be followed during installation and maintenance of the UPS and
batteries, allowing you to correctly set up your system for the maximum safety and performance. Included is infor
-
mation on customer support and factory service, if it is required. If you experience a problem with the UPS, please
refer to the Troubleshooting section in this manual to correct the problem. If the problem is not corrected, please
collect information so that the Technical Support personnel can more effectively assist you.
CAUTION:
Any changes or modifications not expressly approved by the manufacturer of this device could void the
user’s authority to operate the equipment.
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class B Digital Device pur
-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in
-
terference in residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
-
cations. There is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced technician for help. Any special accessories needed for compliance
must be specified in the instruction.
CAUTION:
A shielded-type power cord is required in order to meet FCC emission limits and to prevent interference
to the nearby radio or TV reception. It is essential that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment.
CAUTION:
Any changes or modifications not expressly approved by the manufacturer of this device could void the
user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
This manual contains important safety instructions. Please read and follow ALL instructions carefully during the in
-
stallation and operation of the UPS. Read this manual thoroughly before attempting to unpack, install, or operate.
CAUTION!
To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area,
free of conductive contaminants. (Please see specifications for acceptable temperature and humidity range).
CAUTION!
To reduce the risk of electric shock, do not remove the UPS cover. Qualified Service Personnel must
perform ALL repairs and maintenance. No user serviceable parts inside.
CAUTION!
Hazardous live parts inside can be energized by the battery even when the AC input power is discon
-
nected.
CAUTION!
UPS must be connected to an AC power outlet with fuse or circuit breaker protection. Do not plug into