4
No.
Part
Name
1
KNOB
9
REAR GRILL
2
SWITCH BOX
10
METAL DRUM
3
ON/OFF SWITCH
11
FAN BLADE
12
BLADE PLASTIC NUT
5
MOTOR
13
FRONT GRILL
6
BRACKET
14
POLE
7
LOCK NUT
15 PLASTIC
RING
8
PLASTIC TIGHTENER
16 BASE
Page 1: ...1 20 HIGH VELOCITY PEDESTAL FAN 2 IN 1 MODEL HVP 20S OWNER S MANUAL READ AND SAVE THESE INSTRUCTIONS ...
Page 2: ...ical hazard CAUTION Do not alter the Fan s assembly WARNING Be sure FRONT and REAR GUARD screw are completely screwed down in locking position before operation INSTALLING AS STAND FAN STAND ASSEMBLY 1 Attach OUTER TUBE to the BASE with 4 screws as shown 2 Loosen PLASTIC NUT on OUTER TUBE and extend INNER TUBE to desired height 3 Slide COVER RING down the OUTER TUBE to rest on top of the BASE CAUTI...
Page 3: ...ll automatically shut off should it overheat for any reason If this happens immediately unplug the fan from the outlet CLEANING WARNING Unplug from electrical supply source before cleaning z Use soft damp cloth to clean Then wipe with dry cloth z Do not use a cleaning solution that s harmful to paints or plastics z Do not bend the blades z The motor bearings are permanently sealed and do not requi...
Page 4: ...o Part Name 1 KNOB 9 REAR GRILL 2 SWITCH BOX 10 METAL DRUM 3 ON OFF SWITCH 11 FAN BLADE 4 SWITCH BOX 12 BLADE PLASTIC NUT 5 MOTOR 13 FRONT GRILL 6 BRACKET 14 POLE 7 LOCK NUT 15 PLASTIC RING 8 PLASTIC TIGHTENER 16 BASE ...
