background image

XtraVac VT300 Vacuum Tumbler Operation and Parts Manual 

XtraVac Packaging Machines 

  419 E. 11th Ave. North Kansas City, MO 64116 USA 

VT 300 Vacuum Tumbler       

+1 (800) 728-2999 [email protected] 

 

13 

one-thirds of the amount, please pour out the water.   

4.2.3

The Cover gasket on the Air tightness cover should check very often. If there is defect 

or damage , please replace it immediately. 

4.2.4

It is about 3 months to change the large O-Ring (Page15-17) on the bushing 

4.2.5

To check the O-Ring (Page15-35) of the inner bushing (Page15-34,36) inside the 

vacuum tube each week, If there is defect, please replace it immediately. 

4.2.6

Vacuum oil replacement. 

4.2.3.1

Recommended vacuum oil: BP Engergol RC100, Esso Nuto H100, Mobil Rarus 427. 

4.2.3.2

Drain the oil completely before filling new oil 

4.2.3.3

Oil capacity should be kept at least two-thirds of total amount. 

4.2.4

Change the oil of the vacuum pump for every 120 hours. Also check the oil level from 
oil sight glass every week. Oil capacity should be kept at least two-thirds of total 
amount. If the oil is dirty, please replace it immediately.   

4.2.5

Cleaning Air exhaust tube: Withdraw the Fixing pin first, otherwise the tube is still fixed. 

4.2.6

Detail drawing of the oil pump 

1. oil filling hole

2. oil sight glass

3. oil draining hole

Summary of Contents for VT300

























Reviews: