The contents of this document are provided on an “as is” basis. No representation or warranty (either express or implied) is made as to the
completeness, accuracy or reliability of the contents of this document. The manufacturer reserves the right to change designs or specifications
without obligation and without further notice. Except as otherwise provided, all warranties, express or implied, including without limitation any implied
warranties of merchantability and fitness for a particular purpose are expressly excluded.
Xtralis, Xtralis logo, The Sooner You Know, VESDA, ICAM, ECO, OSID, HeiTel, ADPRO, IntrusionTrace, and LoiterTrace are trademarks and/or
registered trademarks of Xtralis and/or its subsidiaries in the United States and/or other countries. Other brand names mentioned herein are for
identification purposes only and may be trademarks of their respective holder(s). Your use of this document does not constitute or create a licence or
any other right to use the name and/or trademark and/or label.
This document is subject to copyright owned by Xtralis. You agree not to copy, communicate to the public, adapt, distribute, transfer, sell, modify or
publish any contents of this document without the express prior written consent of Xtralis.
Doc: 27212_01
Procedure
1.
Connect to the VLI detector using the latest version of VSC (available at www.xtralis.com)
2.
Activate the
Clean Air Zero
function which is found under the
Device
tab, as shown below.
3.
Enter the password when requested. If you do not know the password, please contact the local VESDA
distributor.
4.
Read the warning and ensure all of the required processes
are in place, once ready click
YES
to proceed.
5.
Wait for one minute and then check the detailed status tab
as shown below at the completion if Clean Air Zero process.
AUTHORISED DISTRIBUTOR OF VESDA
www.flamestop.com.au | [email protected]
