ICAM ILS-2 Product Guide
ICAM by Xtralis
18
www.xtralis.com
6.2
User Functions
Figure 6-1: Programming buttons on the unit
Press and hold SELECT and CHANGE keys simultaneously until the sounder beeps to initialize function
selection.
Press and release SELECT key to sequentially step through functions.
Press and release CHANGE key to modify setting.
The relevant LED flashes continuously to indicate the function selected.
To enable updates to the system, enter the three digit access code (510). To enter numbers into the system,
each number must be sequentially selected in turn. For example to select 5, press the CHANGE key six
times to illuminate the number 5 LED on the display then press the SELECT button. During this operation, the
CODE LED flashes, then the UNLOCK LED illuminates on successful entry.
A description of ILS-2 functions are shown in the following table.
Function
Display
Special Instructions
Reset the unit
-
To reset the unit, press CHANGE when
the LED is flashing.
Isolate the system
ISOLATE LED
flashes when not
set and steadily
illuminates when
set
-
Set fan speed
POWER LED
flashes.
Bargraph display
indicates fan speed
of 0 to 9.
Please refer to Table 6-2 for more details.
Set sensitivity of Channel 1
bargraph to changes in airflow
velocity
FLOW 1 OK
flashes.
Bargraph display
indicates
sensitivity
(0 = Minimum, 9 =
Maximum).
Please refer to Table 6-2 for more details.
Table 6-1: User Functions
