Xtracycle SWOOP, Assembly Manual, Page: 15 / 20

15
52
Use an Allen wrench or screwdriver to pull the other end
through the eye-bolt. Push up on the spring to fully seat
the StabilizerSpring.
53
Slide the spring sleeve over the StabilizerSpring.
55
Determine if you would like to have the U-tubes installed in
the wide setting (shown on the left side of the bike pictured
below) or the narrow setting (shown on the right side). In the
wide setting, the U-tubes will extend 6" out from the frame. In
the narrow setting, they will extend 5.25" out from the frame.
54 - Install the U-Tubes
Before installing the U-Tubes, please note that the rear
insertion end on each U-Tube is slightly longer than the
insertion end on the front end of the U-Tube.
Front
insertion
end
Rear
insertion
end
Narrow Wide