Xtracycle RFA Wheelskirt, Manual, Page: 3 / 5

02 B
With this corner still folded down, fold the back half of the
WheelSkirt back along the dividing line. The corner will match
to a piece of hook and loop tape located on the backside of
the WheelSkirt, helping to hold it folded in place.
02 A
Prior to installation, the RFA WheelSkirt needs to be folded
down to fit the shorter Sport RearRack. To do this, lay the
WheelSkirt down flat, with the front side facing down. Fold
the back corner of the WheelSkirt - the one with a triangle of
hook and loop tape - down.
02 Installing the RFA WheelSkirt
on the rfa Sport RearRack
02 D
Attach the middle hook and loop strap on the backside of
the WheelSkirt onto the center vertical bar of the RearRack.
This strap is located on what is the rear-most end of the
WheelSkirts when they are unfolded. This helps hold the
folded portion of the WheelSkirt in place, preventing it from
becoming unfolded while in use.
02 C
You can now install the WheelSkirt on the RearRack. Holding
the WheelSkirt in position on the RearRack, install the top
hook and loop straps, the front hook and loop straps and the
straps on the bottom diagonal support.
3