Xtracycle Freeloader too 2021, Quick Start Manual

Page: 2 / 6

01 B
Attach the four hook and loop straps located on the sides of the
bags to the vertical supports on the rear rack. There are two
straps on each side of the bag.
01 A
Bring the top back of the FreeLoader Too behind the pannier
rail (if applicable). Attach the five hook and loop straps on
the top of the FreeLoader Too to the top of the RearRack. If
installing on a bike with an LT2 V-rack, you will need to loosen
the deck enough for the strap to fit between the deck and
the rack.
01 installing the freeloader
too on the rear rack
2
01 D
Attach the two bottom hook and loop straps to the frame of
the bike.
Repeat steps 01 A - 01 D for the other side.
01 C
Make sure to attach the straps located toward the front of
the RearRack so it sits below the RackLock. You may need
to loosen some straps and adjust the positioning of the
freeloader in order to accomplish this. The straps on the rear
portion of the bag will both be located above the RackLock.
Please note:
Each FreeLoader Too bag is identical. There is no left side
bag or right side bag.