SP200
Manual
This product is a Solar Charger that can be used to power mobile devices
from the high speed USB or high power USB-C output.
By using the DC output 18V with 11.1A can be provided to charge all our
high energy powerbanks with DC input 12-18V. Compatible with most
solar generator/portable power station on the market. Includes different
size of connectors(8mm DC Adapter for Jauch Powerstations, Goal
Zero/Jackery, 5.5 * 2.5mm DC Adapter for XTPower/Suaoki portable
Generator and 3.5 * 1.35mm DC Adapter for Paxcess/Webetop portable
generator)
For the best use of the Solar Charger and for your safety, please read
these instructions carefully before using the power bank.
Safety
-
The product is not suitable for children as it contains fragile and
small parts that can be swallowed easily.
-
Please do not drop and do not immerse in water as the unit will
be damaged.
-
Do not expose to high temperatures or flammable gases.
-
Please do not remove the housing.
-
Please
don’t directly connect
any contacts as this can lead to short
circuits.
Warranty and Liability:
-
If there is a problem with the device, please contact your dealer.
-
The manufacturer is not liable for injury or damage caused by
improper use.
-
Modification of the product, misuse or unauthorized repair will
void the warranty.
-
XTPower reserves the right to make changes to the product or the
instructions and manuals without prior notice.
Specifications:
1.
Power: USB-C max.45W
USB-A QC3.0 max.24W
DC 18V 11.1A (max)
2.
Dimensions: 59x54x6cm
folded
247x59x3cm
unfolded
3.
Weight: ca. 7kg
Technical Data
-
Pmax = 200W
-
(Vmpp) Max. Voltage at Pmax = 18V
-
(Impp) Max. Current at Pmax = 11.1A
-
(Voc) Open Circuit Voltage = 21,6V
-
Max Efficiency = 22%
Accessories:
-
Solar Charger with connecting cable
-
1 Manual
-
1 Adapter Kabel MC4 auf DC 5.5*2.1mm
-
3 Adapter (7.9*0.9mm, 5.5*2.5mm, 3.5*1.3mm)
Charge your mobile device:
-
You can use the original USB cable of your device to connect with
the according output.
-
Your device will be charged when the charge LED of the Solar
Charge is on.
-
The charging current very much depends on the exposure to
sunlight and can vary a lot. With low sunlight the charging stops
and will restart automatically depending on the sunlight.
-
Please don’t expose your mobile device to direct sunlight.
-
With the DC output all devices with according input between 12
and 18V can be charged.
Important Notice:
Some Apple products like iPad require constant charging currents. With
changing solar light conditions the charging current will fluctuate which
may lead to some error message. To restart charging you need to
disconnect and connect again. We recommend in such case to use a
Powerbank as buffer.
Disposal
-
Solar charger should not be disposed of with household waste.
-
Recycling and disposal of electronic waste make an important
contribution to protect our environment.
CE Declaration of Conformity:
-
This product bears the required CE marking according to Directive
2014/30/EU. The product meets the essential requirements of the
European directives and regulations.
Jauch Quartz GmbH
In der Lache 24
78056 Villingen Schwenningen
Germany
www.jauch.com
