23
4
K
EY
P
ROGRAMMING
The key programming software inside X100PAD PLUS app can get
access to the immobilizer system inside the vehicles and supports
multiple functions like key programming, generate dealer key, all
key lost, immobilizer reset or changing, EEPROM chip coding and
much more.
For different manufacturers, the menu inside each software and the supported
functions will be different. We suggest checking the support list inside our official
software first or ask XTOOL aftersales services if you have any questions.
VEHICLE CONNECTION
To start the key programming process, the VCI communication box
should establish communication with the vehicle, and Bluetooth
should be connected between the tablet and the VCI box. Please
follow the steps below.
1. Turn on the tablet.
2. Connect the vehicle to the tablet following the diagram below.
Usually, the OBD port is located under the dashboard, inside
driver’s footwell.
3. Click into the menus to perform the functions.
The main cable will charge the tablet when connecting to the vehicle.
Some older vehicles are not using the OBD2-16 port, please make sure you’re
using the correct connector. There are extra connectors that’s attached into X100PAD
PLUS, but please contact your dealer if you need other connectors.
