KC501 Key Programming
6
/
7
7.Status LED:
It indicates the current operating status.
8.IC Card Induction Area
It is used to read and write IC card data.
9.Display Screen
It is used to show remote frequency or transponder ID.
10. Remote Frequency Button Press this button to show remote frequency in the display screen.
11. Transponder ID Button
Press this button to show transponder ID in the display screen.
12. Transponder Slot:
It holds the transponder.
13. Vehicle Key Slot:
It holds the vehicle key.
14. Remote Control
Transponder Induction Area
It is used to read and write remote control transponder data.
15. Mercedes Infrared Key
Slot:
It holds the Mercedes infrared key.
3.
UPGRADE AND OVERHAUL
3.1
PRODUCT UPGRADE
The KC501 programmer can be upgraded in the following ways:
1).Update software through Langren technology anti-theft related diagnostic
equipment
When the KC501 is connected to the diagnostic equipment, the diagnostic
equipment will automatically detect the KC501 software version. If it detects
that it is not the latest version, it will automatically update and update to the
latest version.
2).Software update through KC501 PC software, the steps are as follows
：
a. Use a USB cable to connect KC501 to the USB port of the PC;
b. Confirm that the LED indicator on the front panel of KC501 displays
normally;
c. The PC software will automatically detect whether the current version is
the latest version, and if the current version is not the latest version, it will
be upgraded to the current latest version.
