Xtool ASD60 User Manual Download

Page: 69 / 90

— 63 —

the ‘Diagnosis’ folder on your mobile devices.



For Data Playback video

The Data Playback videos are encrypted files and the extraction function is temporarily

not supported.

Q4: HOW TO GENERATE AND UPLOAD DIAGNOSTIC LOG FILES

The ASD60 will automatically generate and store the diagnostic logs. When the device is

connected to the Internet, it will automatically upload all the stored diagnostic logs to the

backend system.

Q5: FAILED TO DIAGNOSE VEHICLE

Contact your dealer to confirm whether the vehicle model is supported by the scan

tool you owned.

Check whether the vehicle is properly connected. (The requirements may vary from

brand or model, please follow the instructions displayed)

Confirm whether you have entered the correct diagnosis menu

Try whether the

Automatic Detection

function can assist you to enter the correct

diagnosis menu

Check whether the software is the latest version, if not, please update to the latest

version first.

Summary of Contents for ASD60



























































































Search results

Summary of Contents for ASD60

Reviews:

Related manuals for ASD60

Brands by name

Popular brands

Xtool ASD60, User Manual

Search results

Summary of Contents for ASD60

Reviews:

Related manuals for ASD60

Brands by name

Popular brands