CHARGING INSTRUCTIONS
•
Use only the original charger recommended and supplied by the manufacturer.
•
Make sure the power supply values match the work light’s specifications. Turn off the light
before charging. Connect the power cord to the light connector and plug the power cord into
a power outlet.
•
Charge the flashlight whenever you notice a decrease in the intensity of the emitted light.
STORAGE
Store the device and all its components in a clean, dry and safe place out of the reach of children
and other unauthorized persons. Avoid storing the device at temperatures below 0°C and above
45°C. When stored in unsuitable conditions, the service life of individual parts and the entire
product may be reduced.
6. CLEANING AND MAINTENANCE
•
Regularly check and properly clean the external parts of the lamp.
•
Clean and disinfect the surface with a damp cloth soaked in soapy water. Alternatively,
use a cotton swab or stick with a suitable cleaning agent on heavily polluted areas. Avoid
using organic solvents, petrol, alcohol, thinner or other solvents, volatile substances and
alcohol-based cleaning agents. Discoloration or damage to lamp components may occur.
•
Original spare parts are not available as standard for this product. Any repairs or
modifications to the product are possible only with the express consent of the seller or the
manufacturer of the product. Otherwise, the manufacturer does not guarantee the proper
function of the product.
•
Do not modify or attempt to disassemble the device in any way.
•
Any servicing of the equipment may only be carried out by an authorized service center of
the manufacturer or seller, or by a specialist with demonstrable qualifications for handling
this type of equipment.
7. DISPOSAL
OBSERVE ALL APPLICABLE ENVIRONMENTAL REGULATIONS!
Upon final decommissioning (at the end of the service life), keep in mind environmental
considerations and aspects and recycling (in general):
•
Dispose of any potentially hazardous waste (e.g., surface-treated components, etc.) in
accordance with the regulations, separate plastics and offer them for recycling. Separate
metal parts by type for scrapping.
•
The owner of the product shall follow the waste management act in terms of sanitary and
environmentally friendly waste disposal. The generate waste must therefore be offered to
waste disposal facilities. This concerns, in particular, metals, electronics, batteries,
plastics, etc.
In the case of waste disposal within the EU, the fundamental framework of the EU waste
management policy is defined by Council Directive 75/442/EEC on waste, as amended by Council
Directive 91/156/EEC on waste. Waste disposal outside the territory of the Czech Republic is
governed by the applicable legislation of the state in which the disposal is to be carried out.
Dispose of the product immediately as soon as it is irreversibly damaged and its proper use is
prevented.
Summary of Contents for XT60847
Page 1: ...P VODN N VOD K POU IT SV TILNA MONT N NAB JEC 240 lm XT60847...
Page 10: ...SVIETIDLO MONT NE NAB JACIE 240 lm P VODN N VOD NA POU ITIE XT60847...
Page 17: ...XT60847 AKUMULATOROWA LAMPA MONTA OWA 240 lm ORYGINALNA INSTRUKCJA OBS UGI...
Page 24: ...CORDLESS WORK LIGHT 240 lm ORIGINAL INSTRUCTION MANUAL XT60847...
