l .Before operating, adjust the adjusting screw to make
the height of handle in perfect position to cut the tile
easily. (Figure 1)
2.Press down the locating screw to zero graduation line,
make it and pointer of swivel overlaping. Then tighten
the clamp handle, make scaleplate and pressure line
overlaping. (Figure 2)
3.Press down the locating screw to make it locate in any
degrees from O to 45
°
. Then tighten the clamp handle.
(Figure 3)
4.After locating, lift the handle, make the cutting wheel
on the tile, and cut the tile slowly. (Figure 4)
5 .After cutting, put handle near the end face of the tile,
then push down, making the tile break. (Figure5)
6.When cutting the tile, outspread bracket can be
unfolded for operating conveniently. (Fi
gu
re 6)
*
Tighten the cutting head bearings before first use.
