Install /Uninstall the spray pipe holder
1. The tank holder post serves as a temporary holder
for the chemical tank lid.
2. To install the spray pipe holder, directly insert it
into the tank holder post .
3. To uninstall the spray pipe holder, directly remove
it from the tank holder post .
1
2
Fig.19
Fig.20
1. Tank holder post
2. Chemical tank lid
3. Spray pipe holder
4. Spray pipe
3
4
Fig.21
OPERATION
CAUTION: Before inserting the battery cartridge into the tool, always check to see that the
tool is switched off.
CAUTION: To prevent sudden spraying, be sure to set the lever cock to STOP, before turning
sprayer switch ON or OFF.
CAUTION: When spray work is interrupted, be sure to turn switch OFF, to prevent inadvertent
spraying.
CAUTION: Be sure to check the situation of surroundings before turning sprayer switch ON.
How to use the lever cock
1. Depress button of the lever cock to spray,
Release it to stop.
2. For continuous operation, a continuous
operation position is provided. Depress button
of the lever cock and then push it forward to
lock on and backward to lock off.
1
Fig.22
(2)
(3)
Fig.23
1. Lever cock
2. Lock off
3. Lock on
Spraying
While spraying ,always hold the handle grip firmly. Once spraying is complete,
immediately set lever cock to STOP, and then turn the power switch OFF.
Adjusting the intensity of spraying
While spraying ,you can adjust the intensity
of spraying through tightening or loosening
the adjust nut. Clockwise to increase and
anticlockwise to reduce.
1
Fig.24
1. Adjust nut