OPERATION
ELECTRIC TOOL HANDLING AND MAINTANCE
a)
Do not force the tool.
b)
Do not use if the ON/OFF switch does not work properly.
c)
Disconnect the plug from the socket and/or battery from the tool prior to any adjustment,
accessory replacement or storage of the tool. These preventive safety precautions reduce
the risk of accidental starting of the tool.
d)
When not in use, idle tools should be stored in a place out of reach of visitors and children.
e)
Maintain careful manipulation with the tool. Check for deflecting or jamming of turning parts, damaged parts
or other conditions which may influence operating with the tool. Keep tools sharp and clean for better and safer
performance. Properly serviced tools are less likely to become covered in impurities and are better controlled.
Use
equipment recommended by the producer of your model only. Modifications and accessories used at one tool
may
be dangerous when used with another model.
WARRANTY DOES NOT APPLY FOR ACCESSORIES
Safety Warnings for Garden Tool Operation
•
The operator must use the product in accordance with the regulations. The local
conditions must be taken into account. When working, pay attention to other people,
especially to children.
•
Never allow children, persons with physical, sensory or mental limitations or a lack of
experience and/or knowledge and/or people unfamiliar with these instructions to use the
product. Local regulations may restrict the age of the operator.
•
Children should be supervised to ensure that they do not play with the product.
Application
•
When working with the machine, always hold it firmly with both hands and provide for a
secure stance. The
garden tool is guided more secure with both hands.
•
Always wait until the machine has come to a complete stop before placing it down.
•
Never operate the machine with a defective protection guard/cover or without safety device.
Ensure that
these are properly mounted. Never use the garden tool when incomplete or
after unauthorised changes.
•
Never operate the machine if the cord is damaged or worn.
•
Never replace non-metallic cutting elements with metal cutting elements.
•
Never repair the garden tool yourself unless you are qualified to do so.
•
Other persons and animals should remain or be kept a suitable distance away when using the
garden tool.
The operator is responsible for third parties in the work area.
•
Wait until the cutting head has completely stopped before touching it. The cutting head
continues to
rotate after the trimmer is switched off; a rotating cutting head can cause in-jury.
•
Work only in daylight or in good artificial light.
•
Avoid operating the trimmer in bad weather conditions especially when there is a risk of
lightning.
•
Operating the trimmer in wet grass decreases the efficiency of performance.
•
When transporting, switch the machine off and remove the battery.
•
Always ensure a safe working position when working with the trimmer. Always keep your
hands and feet
at a safe distance from rotating parts.
•
Keep the balance all the time while trimming to prevent falling over.
•
Take care when placing product on floor, as it may become a trip hazard.
•
Remove the battery before replacing the spool.
•
Inspect and maintain the trimmer regularly.
•
Always wear gloves when cleaning product or replacing cutting means.
•
Be careful of injuries from the blade used for cutting the cutting line. After feeding cutting line, always
return the trimmer to a horizontal working position before switching on.
Summary of Contents for XT102895
Page 13: ...Sch matick pohled...
