USING
1.
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure switch is in the locked or off position before inserting batter pack.
Carrying tools with your finger on the switch invites accidents.
4.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable
better control of the tool in unexpected situations
5.
Use safety equipment. Always wear eye protection, Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate conditions.
Power tool use and care
1.
Use clamps or other practical ways to secure and support the work piece to a stable platform.
Holding the work piece by hand or against your body is unstable and may lead to loss of control.
2.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
3.
Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch
is dangerous and must be repaired.
4.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users
5.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp
cutting edge are less likely to bind and are easier to control.
6.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have the tool serviced before using .Many accidents are caused
by poorly maintained tools.
7. Use only accessories that are supplied with your model. Other accessories that may not be suitable for this
tool and may create a risk of injury when used.
Specific safety rules
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden wiring .Contact with a “live” wire will also make exposed metal parts of the tool “live” and
shock the operator.
2.
keep hands clear of moving parts .
3.
Do not touch moving parts, Allow the power tool accessories (bit and blades etc)to cool before
touching them .They can become extremely hot during use and can burn your skin.
4.
Always wear protective safety glasses when operating power tools. Wear a face mask when
environment is dusty .
Read and understand the operating instructions before using the appliance. Familiarize with the control
elements and how to use the appliance properly. Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third
parties. In case of any doubts about connection and operation refer please to our customer center. This
appliance is not intended for use by children. The machine may not be used by persons with reduced
physical, sensory or mental capabilities or persons with a lack of knowledge or experience unless they are
supervised by a person responsible. Children must be supervised in order not to play with the machine.
Summary of Contents for XT102890
Page 6: ... STOP O t ...
Page 7: ...0 ee Q o o o l l J J ...
