XTline XT102810, User Manual, Page: 30 / 31

12. cover separate from tank (picture 12)
- open the 2 sides clamps
- holding the handle and take out the cover
13. filter replacement (picture 13)
- take out cover, the dirty filter is in the bottem, take out the filter
- use new filter instead of old one, then assemble
14. filter clean (picture 14)
- take out the filter and use water clean
- after clean, keep the filter dry, then reuse
15. connectors clean (picture 15)
- take off the connectors from cover, use water clean
- assemble the connectors and keep it tight
17. speed controller operation (picure 17)
- speed controller above the switch
- speed controller turn left, the suction turn down. Speed controller
turn right, the suction turn up
18. synchronous working with electric tool (picture 18)
- connect vacuum cleaner hose with dust absorption pore of air tool
- put the power plug of air tool into the gas seat valve of vacuum
cleaner, and the other side of gas seat valve connects with air
compressor
- switch turns to stay by. Open the electric tool and then vacuum
cleaner will start to wor k