2.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control
Electrical Safety
1)
Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.(The
following applies only to tools with a separate battery pack)
2)
A battery operated tool with integral batteries or a separate battery pack must be recharged only
with the specified charger for the battery. A charger that may be suitable for one type of battery may create
a risk of fire when used with another battery.
Personal Safety
1.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure switch is in the locked or off position before inserting batter
pack. Carrying tools with your finger on the switch invites accidents.
4.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable
better control of the tool in unexpected situations
5.
Use safety equipment. Always wear eye protection, Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate conditions.
Power tool use and care
1.
Use clamps or other practical ways to secure and support the work piece to a stable platform.
Holding the work piece by hand or against your body is unstable and may lead to loss of control.
2.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
3.
Do not use tool if switch does not turn it on of off. A tool that cannot be controlled with the switch
is dangerous and must be repaired.
4.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users
5.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp
cutting edge are less likely to bind and are easier to control.
6.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have the tool serviced before using .Many accidents are caused
by poorly maintained tools.
7.
Use only accessories that are supplied with your model. Other accessories that may not be suitable
for this tool and may create a risk of injury when used.
Specific safety rules
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden wiring .Contact with a “live” wire will also make exposed metal parts of the tool “live” and
shock the operator.
2.
keep hands clear of moving parts .
3.
Do not touch moving parts, Allow the power tool accessories (bit and blades etc)to cool before
touching them .They can become extremely hot during use and can burn your skin.
4.
Always wear protec
Summary of Contents for XT102795
Page 4: ...2 7 6 j 3 j 1 4 9 j 5 t ...
