XTline XT102735, User Manual

Page: 29 / 35

ELECTRICAL AND BATTERY SAFETY
1. Do not dispose of battery (ies) in fire. Articles can explode. Check with your local
authorities for possible battery recycling.
2. Do not attempt to disassemble or destroy the battery (s). The released electrolyte is
corrosive and can corrode the skin or injure the eyes. May be toxic if swallowed!
3. Do not charge batteries in rain or humid areas.
4. Do not charge the batteries outdoors.
5. Do not handle the charger, including its electrical plug and terminals, with wet hands.
6. Avoid hazardous environments. Do not use the device in wet or humid areas or in the rain.
Water entering the equipment greatly increases the risk of electric shock.
PERSONAL SAFETY
a) Stay alert and do not use the tool when under influence of alcohol.
b) Use safety glasses and face or dust mask. Wear protective hearing equipment, helmet and
boots.
c) Avoid unintentional starting. Before connecting to power source or battery, make sure the
switch is at OFF position.
d) Dress properly. Do not wear loose clothing or jewelry. They can be caught with moving
parts.
e) Remove adjusting keys and wrenches. Tool or adjusting key you leave attached to a turning
part of the tool may cause injury.
f) Do not overreach. Proper footing and balance at all times allow better control of the tool in
unexpected situations.
g) Use approved protective equipment only.
ELECTRIC TOOL HANDLING AND MAINTANCE
a) Do not force the tool.
b) Do not use if the ON/OFF switch does not work properly.
c) Disconnect the plug from socket and/or battery from the tool prior any adjustment,
accessory replacement or storage of tool. These preventive safety precautions reduce a risk
of accidental starting of tool.
d) When not in use, idle tools should be stored in a place out of reach of visitors and children.
e) Maintain careful manipulation with the tool. Check for deflecting or jamming of turning parts, damaged
parts or other conditions which may influence operating with the tool.
f) Keep tools sharp and clean for better and safer performance. Properly serviced tools are less likely to
become covered in impurities and are better controlled.
g) Use equipment recommended by the producer of your model only. Modifications and accessories used at
one tool may be dangerous when used with another model.
Warranty does not apply for accessories!