XTline LCR777-9, User Manual

Page: 41 / 42

1. S aw blade
2. Blade clamp
sleeve
CAUTION: Keep hands and fingers away from the lever during the switching operation. Failure to do
so may cause personal injuries.
NOTE: If you remove the Sabre saw blade without rotating the blade clamp sleeve fully, the sleeve
may not be fixed. In this case, rotate the blade clamp sleeve fully, then make the sleeve fixed at the
released position.
NOTE: If the blade clamp lever is positioned inside the tool, switch on the tool just a second to let the
blade out as shown in the figure. Remove the battery cartridge from the tool before installing or
removing the recipro saw blade.
OPERATION
CAUTION: Always press the shoe firmly against the workpiece during operation. If the shoe is
removed or held away from the workpiece during operation, strong vibration and/or twisting will be
produced, causing the blade to snap dangerously.
CAUTION: Always wear gloves to protect your hands from hot flying chips when cutting metal.
CAUTION: Be sure to always wear suitable eye protection which conforms with current national
standards.
CAUTION: Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause
premature bladewear.
CAUTION: Do not quirk the blade during cutting.
CAUTION: Always Use the correct type of saw blade. Wood cutting blade for wood cuting and
plastic cutting, Steel cutting blade for ferrous materials or metal cutting.
Wood cutting
Metal cutting
NOTICE: Do not cover vents when working , or it may cause over- heating and damage to the tool.
NOTE: If the tool is operated continuously until the battery cartridge has discharged, allow the tool to
rest for 15 minutes before proceeding with a fresh battery.
MAINTENANCE
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment
should be performed by Liangye Authorized or Factory Service Centers, always using Liangye
replacement parts.