Symbol Chart
Note that only some of these symbols will appear on your model
On
Hertz (cycles / sec)
Off
Frequency
Dangerous Voltage
Negative
Increase / Decrease
Positive
AC Auxiliary Power
Direct Current (DC)
Fuse
Protective Earth
Amperage
Line
Voltage
Single Phase
Three Phase
Duty Cycle
SMAW
GMAW
GTAW
High Temperature
Wire Feed Function
Welding Gun
Installation
Connection
The welder should be placed in dry and dusty surrounding where there is no corrosive
chemicals, flammable, explosive gases.
* Avoid direct sunlight and rain. And maintain the ambient temperature ranging from
-10℃ to 40℃.
*
The space of 50cm should be left around the equipment.
*
If indoor ventilation is not good enough, the ventilation exhaust device should be
installed
