Page
7
sur
17
NB: The bird detection process lasts a maximum of 18 seconds. If your bird isn’t detected
during this time, the “NEST” screen will appear. Make sure your bird is switched off before
using the “connection” button to access the bird detection screen and restart the detection
process. Turn on your bird after the detection has begun.
“NEST” screen and settings:
The NEST is the configuration screen for the application. Setting options include:
- Flight MODE selection:
EXPERT: Classic radio control interface with throttle control cursor and two directional
cursors for left and right turns. You can choose between controls optimized for left or right
handed pilots.
EASY: “Motion control” interface where only the throttle is controlled with a cursor and
changes of direction are controlled by tilting the smartphone. The tilt control sensitivity can
be adjusted.
The minimum tilt angle for changing the flight direction is 12° by default (RESET button).
This tolerance prevents you from triggering a turn if you don’t hold your smartphone
perfectly flat.
The maximum tilt angle for changing the flight direction is 30° by default. The range of the
tilt angle controls the movement of the rudder between 0 – 100%
- Links to the BIONIC BIRD website with more information and videos including this
manual.
- A quick start-up GUIDE with condensed information.
- Return to the CONNECTION screen to give your bird a NAME.
To finish, launch the flight interface by pressing the “FLY” button.
Choose flying mode
Set sensitivity for
easy mode
Link to our website
Name your
BIONIC BIRD
Quick starter guide
Choose Right/Left
Hand for Expert Mode
Go to bird
detection screen
