Model
XE570S
Service
Replacing Parts
Parts
4 Pedal Arm Assembly
Rev.
Procedures：
1.
Follow the procedure 2 to take apart
the Connecting Arm Assembly.
2.
Use Phillips head screwdriver to
unscrew Pedal Arm Cover, as shown
in figure 1.
3.
Use M8 and 14mm wrenches to release
3/8” x 2-1/4” socket head cap
screw, 2pcs of 3/8"×19×1.5T flat
washers and 3/8” x 11T Nylon nut
and take apart Pedal Arm Assembly, as
shown in figures 2 and 3.
4.
To take the Bushing Housing apart,
use 12mm wrench to release 5/16" x
15m/m hex head bolt and 5/16" x 35
x1.5T flat washer, as shown in figure
4.
5.
Reverse above steps to resume all
parts.
1
2
3
4