![background image](http://html.mh-extra.com/html/xterra/fs4-0e/fs4-0e_owners-manual_890220008.webp)
6
1
Assembly Instructions
Console Mast & Console
1. Slide the Console Mast Cover (
41
) over the bottom of the Console Mast
(
10
) in the direction shown. Take the end of the wire tie that exits the
bottom of the mast and wrap it around the Console Cable (
32
) that exits
the top of the frame unit. Guide the Console Cable (
32
) up through the
bottom of the mast and pull it up with the end of the wire tie that exits
the top of the mast. Seat the bottom of the mast into the frame bracket.
Secure the mast to the frame with four Hex Head Bolts (
70
) and Flat
Washers (
97
) to the sides of the mast. Secure with two Hex Head Bolts
(70) and two Curved Washers (
102
) to the front of the mast. Tighten all
bolts with the Wrench (
110
).
2. Remove the wire tie that is connected to the Console Cable (
32
) and the
frame. Plug in the Console Cable (
32
) and Hand Pulse Wires (
37
) into
the back side of the console. Secure the console to the mast with four
Phillips Head Screws (
78
) tightening with the M5 Allen Wrench/Phillips
Head Screw Driver (
108
).
3. Snap the Console Mast Cover (
41
) into place on top of the side covers.
Hardware Step 1
#70
. 5/16” x 15mm
Hex Head Bolt (6 pcs)
#78.
M5 x 10mm
Phillips Head Screw
(4 pcs)
#97
. 5/16” x 23 x 1.5T
Flat Washer (4 pcs)
#102
. 5/16” x 23 x 2T
Curved Washer (2 pcs)
Summary of Contents for FS4.0e
Page 1: ...OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ELLIPTICAL ...
Page 2: ......
Page 21: ...19 Exploded View Diagram ...
Page 25: ...23 ...