FS3.5 Elliptical
5
1. Install the Front Stabilizer (
14
) on the front stabilizer holding plate at the
bottom of the main frame with the transportation wheels facing forward
and secure them with two Carriage Bolts (
77
), two Curved Washers
(
112
) and two Cap Nuts (
96
) by using the Wrench (
115
).
2. Secure two Slide Wheel Covers (
65
) on left and right pedal arm (
5
) with
four Phillips Head Screws (
82
) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (
118
).
3. Insert the shaft on left connecting arm (
7)
to the bushing on left pedal
arm (
5
) and secure with one Button Head Socket Bolt (
80-1
) together
with one Flat Washer (
104-1
) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (
118
). Do it the same way for right connect-
ing arm (
8
) and right pedal arm (
5
).
FS3.5
Assembly Instructions
Hardware Step 1
Front Stabilizer and Connecting Arms
#77
. 3/8” x 3”
Carriage Bolt (2 pcs)
#80-1
. 5/16” x 15mm
Button Head Socket
Bolt (2 pcs)
#82
. M5 x 15mm
Phillips Head Screw
(4 pc)
#96
. 3/8”
Cap Nut (2 pcs)
#104-1
. 8.7” x 20 x 1.5T
Flat Washer (2 pcs)
#112
. 3.8” x 23 x 1.5T
Curved Washer (2pcs)
1