background image

ERG220 Rower

17

Distance

 

Displays the distance from 0 to 9999 meters. In “Autoscan” mode, the value will hold for 6 

seconds before continuing to the next value, users also can press the 

MODE

 button to cycle 

through the other values until the ARROW icon ◄ points to display the distance value. This 

will end “Autoscan” mode and only the selected value will display continuously. 

Time

 

Displays the workout time from 00:00 to 99:59. Users can press the 

MODE

 button to cycle 

through the other values until an ARROW icon ◄ points to “Time” to display the workout time 

value.

Count

 

Displays the step from 0 to 9999. Users also can press the Mode button to cycle through the 

other values until an ARROW icon ► points to “Count”.

Calories

 

Displays the calories burned during training from 0.0 to 9999. Users also can press the 

MODE

 button to cycle through other values until an ARROW icon ◄ points the calories.

SPM

 

Displays current Strokes Per Minute from 0 to 120. Users also can press the 

MODE

 button to 

cycle through the other values until an ARROW icon ◄ points to display “SPM”.

Pulse

 

Displays the current heart rate in beats per minute. Users also can press the 

MODE

 button to 

cycle through other values until an ARROW icon ► points to display “Pulse”.

Reset

 

Hold the button for 2 seconds. All the function values, except odometer, will be reset to zero.
 

Note:  

If the console displays abnormally, please re-install the batteries and try again. Please 

properly dispose of your batteries after use.

Summary of Contents for ERG220 ROWER

























Reviews: