CUSTOMER SERVICE 1-888-707-1180
12
MAURICE PINCOFFS CANADA©2010
•
Tilt the elliptical to one side and put something under the unit for support and install the
three levelers (40) for that side. Tilt the unit to the other side and install those three
levelers (40). Level the elliptical once it is positioned where it will be used. Screw the two
middle levelers all the way in and the front and rear levelers all the way in, then back
them out about two or three turns. Level the unit using only the front and rear levelers
first, then adjust the middle levelers so they touch the floor. Make sure to lock the
levelers when finished.
•
Press the six plastic end caps (83) into the oval stabilizer tubes.
STEP 5: LEVELERS & END CAPS
