Dyaco Canada Inc 2017
9
STEP 3
1. Insert the handlebar post (17) to the main frame (16). Secure using a quick release knob (7).
2. Remove 4 sets of spring washer (19) and allen screw (20) from handlebar post (17).
3. Attach the handlebar (18) to the handlebar post (17). Secure using 2 sets of spring washer (19)
and allen screw (20) at the 2 lower screw holes.
4. Attach computer bracket (64) to handlebar (18) and secure using 2 sets of spring washer (19) and
allen screw (20) at the 2 upper screw holes.
5. Attach computer (65) onto the computer bracket (64) and secure using 2 screws (68) which are
pre-assembled on the backside of computer (65). Attach sensor wire (69) to computer (65).
Note: The handlebar post can be adjusted vertically.
STEP 4
1.
Attach the left pedal (1L) to the left crank (33).
2.
Attach the right pedal (1R) to the right crank (36).
Note: The right pedal should be threaded on clockwise and the left pedal on counter-clockwise.
YOUR UNIT IS NOW FULLY ASSEMBLED
