Model No: WR254
8
If required, connect any port to a normal port on another Hub, using a standard LAN ca-
ble. Any LAN port on the Wireless Router will automatically function as an "Uplink" port
when required.
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use the cable
supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.
4. Power Up
•
Power on the Cable or DSL modem.
•
Connect the supplied power adapter to the Wireless Router and power up.
Use only the power adapter provided. Using a different one may cause hardware damage
5. Check the LEDs
•
The
Power
LED should be ON.
•
The
Status
LED should flash, then turn Off. If it stays on, there is a hardware error.
•
For each LAN (PC) connection, the LAN
Link/Act
LED should be ON (provided the PC
is also ON.)
•
The
WAN
LED should be ON.
•
The
WLAN
LED should be ON
For more information, refer to
Front-mounted LEDs
in Chapter 1.
