IP CAMERA User’s Manual
31
2.3.6 Basic Networking Settings
Factory default the “Using DCHP” is chosen, the IP Camera will try to get IP
address automatically from DHCP SERVER of your network.
You can also configure the IP address manually.
IP
: enter the IP address assigned.
Mask
: Enter the subnet mask. The default is 255.255.0.0
Gateway
: Enter IP gateway, normally is your broadband router IP address.
DNS
: Enter DNS IP address provided by your ISP (Internet service provider).
Http
Port
: Enter the input port number, default as 80.
If IP camera connects with ADSL directly chose Using ADSL Dialup, enter ADSL
dialup user and password
Note:
After “
Submit
” new network settings, camera will reboot to adopt new
settings automatically.
2.3.7 Wireless LAN Settings (
2.4GHz Wi-Fi AP required
)
Using Wi-Fi Lan
: Only for wireless IP Camera, you must set correct
SSID
and
WEP
Summary of Contents for XL-ICA301A
