35
Parameter
Function
Record
Channel
System auto activates motion detection channel to record once
alarm occurs (working with motion detection function). Please
note you need to go to Storage-> Schedule to set current channel
as general record.
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs and ends.
PTZ
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
You need to input capture channel number so that system can
backup motion detection snapshot file.
2.3.2.2
Relay output
The relay output interface is shown as in Figure 2-23.
Figure 2-23
Please refer to the following sheet for detailed information.
Parameter
Function
Alarm output
There are two output channels. Please click the corresponding
button. If you want to enable the alarm activation output function,
please press the corresponding button and then trigger.
Please note the interface here is for reference only. The
alarm output number may vary due to different series
products.
Trigger
When the alarm output channel is open, the output port can
immediately output an alarm once it occurred.
Refresh
Refresh alarm output status.
