20
User Manual of Network Camera
dialog box to pop up, and then set the parameters like IP address, etc. for your demand as Fig. 3.2.4.
Enter the menu by invoking the 95
th
preset. Select the function you want by clicking the direction
key. Click the IRIS+ button you can enter the submenu. The menu operation is like the remote
control.
Note: If plug the SD card into the camera, user should enter the “config” and select “other
function” to format the SD card.
For more specific information of “Remote Parameters Config”, please refer to “Instructions of Client
Software (version 4.01)” from Section 2.5.3 of remote-distance parameter settings. Instructions can
be found in the client software4.01 in the path of “Start”
→
“Program”
→
“client software 4.01”
after installation.
Fig. 3.2.4 Remote Parameters Configuration
3.3 Configuration via Client Software
After the installation of client software-4000(v2.0), there is a short-cut icon named “Client
Software-4000(v2.0)” on computer’s desktop. Please double click client software icon, a message
box of “Register Administrator” as Fig. 3-4-1 will appear the first time running. Password should be
more than 6 digits for registration.
Note: Please keep the user name and password in mind .You will not be able to get access the
software without the proper login information.
20