11
2.5.1 Connect the XL-GFC142M (DPU Master) and the XL-GFC142SR (CPE Slave) to the Line
The objective for LAN extender is to pass high speed data over a twisted pair cable. In the setup, connect DPU Master to
CPE Slave through phone wire (24~26 AWG) or line simulator or any other hardware representation of a cable network, with
or without noise injection and crosstalk simulations.
2.5.2 Connect the XL-GFC142M (DPU Master) and the XL-GFC142SR (CPE Slave) to LAN Devices
In the setup, usually an Ethernet tester serves as a representation of the LAN side as well as a representation of the WAN(Line)
side.
2.5.3 Run Demos and Tests
The Ethernet tester may send data downstream as well as upstream. It also receives the data in order to check the integrity of the
data transmission. Different data rates can be tested under different line conditions
Summary of Contents for XL-GFC142M
