36
Cable tracing interface
Click “Open”
to start cable tracing, tester start sending video
signal, and then click "Close" to stop the video signal sending,
and user can exit cable tracing by pressing return.
Turn on the receiver, connect the RJ11 test line to the cable
needed to be test, and the click "Open" icon button, the
receiver will start inspection. Keeping the video signal, and
then you can find the route of the wiring.
1.6 Check Line Sequence (Optional)
The device supports generate network line signal, can do line
sequence checking work with the receiver.
The device send a specific signal sequence, and injected into
the cable through straight-through cable, with a receiver can
receive the corresponding signal. Then you can view the
network check line sequence.
Click the “Check Line Sequence”
icon to enter the check line
sequence function interface, as below:
