111
XL-DM317G Multi-service Access
Test PDA
rude using method break the inside main board.
➢
Please don't use the irritant chemicals, irritant
cleanser or caustic cleanser to clean the tester. When
cleaning the tester, please use rag with mild soap water to
wipe gently.
➢
Please don't spread the pigment for the tester. Because
the pigment may obstruct the usage of the active
accessories.
Note:
The max SAR is 2.0W/Kg, which meets the
requirement of the national standard GB 21288.
Optical power and visual fault locator part:
➢
Keep the sensor end face clean: no dust, no pollution.
Don't use unclean, nonstandard adapters. Don't insert into
the end face with bad polished surface or the sensor end
face will be damaged.
➢
When don't use the power meter, please cover the dust
cap immediately to keep the end face clean in order to
prevent the sensor from the dust to result in the error during
the test.
➢
Clean the sensor end face regularly.
➢
when this visual fault locator is working, it is forbidden
that eyes stare output end of the laser which will hurt eyes
and skin.