Industrial PDA
59
interface. As follows:
Cable tracing interface
Click
“
Open
”
to start cable tracing, tester start sending
video signal, and then click "Close" to stop the video signal
sending, and user can exit cable tracing by pressing return.
Turn on the receiver, connect the RJ11 test line to the
cable needed to be test, and the click "Open" icon button,
the receiver will start inspection. Keeping the video signal,
and then you can find the route of the wiring.
Network Layer Test
Network layer test which including Ping test, Ifconfig
test, Route test and Traceroute test. Sliding screen can
Summary of Contents for XL-DM307G
