- 4 -
Twist off the screws on the side panel of the case and then open the cover of the
chassis.
Fix the HDD on the HDD screw whole sites of the baseboard with screws.
Connect the HDD data cable and power cable.
Cover the case, fix it with screws.
3. Local Operation Guide
3.1 Start/Shutdown System
3.1.1 Start System
Plug power cable, press power switch, the power led will be on and the DVR
will start. After booting, the video output default to multi-window output mode.
If the booting time is within the record setting time period, the system will auto
enable the record function.
Notice:
Please use the DVR matching power supply instead of any other
power supply of any other type or brand.
3.1.2 Shutdown System
Click
→ click Shutdown. (Note: this method is suggested when
shutdown device in order to avoid damage to the device from electricity
cut-off by accident).
Notice:
Before changing the HDD operation, you should shutdown the device
and cut the power supply first and then operate.
3.1.3 Power Failure Recovery
When the DVR is under the recording status, if the system power is cut off or
the device is shut down forcefully, after reconnected with the power supply,
the DVR will auto-save the video before cutting and auto-recover to the
previous status and continue to work.
3.2 System Login
After normal booting, single-click
or press the OK key on the remote
control to pop-up the login dialog box, user input the user name Admin and
password 888888(default login password) in the input box.
