XtendLan INV-4E1, User Manual

Page: 5 / 7

BYC-C4 Interface Converters
5. Configuration
5.1 Front panel
5.1.1 Labels, LED indictors and dip switches on the front panel are shown in Figure 5-1 below: igure 5-1 below:
Figure 5-1 Figure 5-1
5.1.2 LED indicators & dip switches on the front panel are defined as below: 5.1.2 LED indicators & dip switches on the front panel are defined as below:
¾ Description of indicators: ¾ Description of indicators:
LED LED
Color Color ON ON OFF OFF
PWR Green Power supply is on Power is off or disconnected
CH1 Green 1
st
E1 input signal is ok Loss of 1
st
E1 input signal
CH2 Green 2
nd
E1 input signal is ok Loss of 2
nd
E1 input signal
CH3 Green 3
rd
E1 input signal is ok Loss of 3
rd
E1 input signal
CH4 Green 4
th
E1 input signal is ok Loss of 4
th
E1 input signal
LINK Green Ethernet port is connection Ethernet port is disconnection
FDX Green Ethernet is full-duplex Ethernet is half-duplex
SPD Green Ethernet speed is 100Mbps Ethernet speed is 10Mbps
TRD Green Ethernet data is transmitted No Ethernet data is transmitted
5.2 Rear panel
5.2.1 Interface and connector on the rear panel are shown in Figure 5-2.
Figure 5-2
5.2.2 E1 interface 120 Ω /RJ-45 definition:
E1 OUT E1 IN
RJ-45 1 (GND) 2 (+) 3 (-) 5 (GND) 6 (+) 7 (-)
4