XtendLan HCA-315M12, User Manual

Page: 6 / 30

5
Quick Start
2.1 Load Batteries
Install 4 AA batteries or 8 AA batteries.
2.2 Insert SD Card
The camera comes with 32M internal memory.
Before inserting the SD card into the card slot, please make sure
the write-protect switch on the side of the SD card is “off”(NOT in
the “Lock ” position).The supported memory capacity is up to
32GB . If you use a card capable of above 32GB, make sure you
test it before putting the camera in use.
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE
BEFORE YOU INSTALL OR REMOVE THE BATTERIES OR
THE SD CARD.
Function Switch
There are three positions for the switch: OFF, ON and TEST. They
each correspond to three different modes of the camera. When
batteries need to be changed or when the device is not in used, it
should be at the OFF mode.
2.3 Enter Test Mode
Moving the switch to the TEST position would set camera to the
preview testing mode. When the device is in this mode, you can
manually take pictures, videotape, view existing photos and videos,
and adjust the parameters just like using an ordinary camera.