Press DELETE key for some time to enter BIOS
Change
boot
time
（
Hour
,
minute
and
second
form
up
side
down
）
After that, Press F10 and click YES to save . The computer will restart.
(
Notice
:↑↓← →
keys
on the keyboard can change direction
)
Press
DELETE
to
enter
to
BIOS
Click South Bridge under Chipset, and press [Enter]
Click Restore AC Power Loss, and pres [Enter] to change Power off to Power
on
Chipset
North Bridge
South Bridge
Save conf iguration and reset?
Save & reset
Yes
NO
Chipset
Restore AC Power Loss
Power off
Power on
Last State
Addio Controller [ Enabled ]
PCI Express Root Port 2 ( LAN ) [ Enabled ]
PCI Express Root Port 4 ( PCIE ) [ Enabled ]
Make on LAN
Restore AC Power LOSS [ Power off ]
Chipset
North Bridge
South Bridge
Boot
after
connected
to
power
Timing Boot
RTC Power On Funtion
Advanced
[Disabled]
Enable or disable System wake on alarm
event. When enabled, System will wake
on the hr :: min :: sec specified
RTC Power On Funtion
Disabled
Enabled
BIOS Information
BIOS Vendar
BIOS Version
Build Date and Time
CPU Information
Intel(R) Celeron(R) CPU 1037U 1.80GHz
Memory Information
Total Memory
Memory Frequency
Intel SB Name
Stepping
ME FW Version
ME Firmware SKU
System Date
System Time
American Megatreds
CR20T103
04/29/2014 16
∶
37
∶
45
4096 MB (DDR3)
1333 Mhz
NM70
04/C1
8.1.40.1416
1.5MB
[Tue 07/22/2014]
[14
∶
12
∶
29]
Set the Date. Use Tab to switch
between Date elements.
→←：
Select Screen
¤￠：
Select Item
Enter
：
Select
＋
/
－：
Change Opt.
F1
：
General Help
F2
：
Previous Values
F9
：
Optimized Deafults
F10
：
Save & Exit
ESC
：
Exit
Advanced
Chipset
Boot
Security Save & Exit
Main
RTC Power On Funtion
RTC Power On Hour
RTC Power On Minute
RTC Power On Second
[Enabled]
0
0
0
Enable or disable System wake on alarm
event. When enabled, System will wake
on the hr :: min :: sec specified
Advanced
Legacy OpROM Support
Launch LAN PXE OpROM
ACPI Settings
CPU Configuration
SATA Configuration
Intel(R) Rapid Start Technology
USB Configuration
IT8772E_B HW Monitor
CPU PPM Configuration
APM Configuration
[Enabled]
Save & reset
Save configuration and reset
Yes
No
Advanced
Main
BIOS Information
BIOS Vendor American Megatrends
BIOS Version CR20T103
Build Date and Time 04/29/2014 16:37:45
CPU information
intel(R) Celeron(R) CPU 1037U 1.80GHz
Memory informat ion
Total Memory 4096 MB (DDR3)
Memory Frequency 1333 Mhz
intel SB Name NM70
Stepping 04/C1
ME FW Version 8.1.40.1416
ME Firmware SKU 1.5MB
[ Tue
/22/2014]
System Time [ 14:12:29 ]
System Date
07
Advanced
Click APM Configuration under Advance and press [Enter]
Change Disabled to Enabled by pressing [Enter]
Legacy OpROM Support
Launch LAN PXE OpROM
ACPI Settings
[Disabled]
Advanced
APM Configuration
CPU Configuration
SATA Configuration
Intel(R) Rapid Start Technology
USB Configuration
IT8772E_B HW Monitor
CPU PPM Configuration
(
Notice
:↑↓← →
keys
on the keyboard can change direction
)
After that, Press F10 and click YES to save . The computer will restart.
All manuals and user guides at all-guides.com
