59
In Figure 4-35, please click direction arrows (See Figure 4-36) to adjust PTZ position. There are
total 8 direction arrows.
Figure 4-36
4.8.3 3D Intelligent Positioning Key
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 4-
37. Please make sure your protocol supports this function and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to
adjust section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ
automatically. The smaller zone you dragged, the higher the speed.
Here is a sheet for you reference.
Figure 4-37
Name
Function
key
function
Shortcut
key
Function
key
function
Shortcut
Key
Zoom
Near
Far
Focus
Near
│
Far
►
│
Iris
close
Open
4.9 Preset/ Patrol/Pattern/Scan
In Figure 4-35, please click the “set” button. The interface is shown as below. See Figure 4-38.
Here you can set the following items:
Preset
Tour
Pattern
Border
Figure 4-38
In Figure 4-35, click page switch button, the interface is shown as in Figure 4-39.
Here you can activate the following functions:
Preset
Tour
