background image

 

 

4

When the Server deploys the devices, the running parameters’ limitation should be set according to the 

specific hardware. If the Server works unstable, lower the parameters and run again. If the problem still 

exists, please contact the developers to ask for advice

Remote playback restrictions: at most 30 channels playback and 5 channels download at the same time. 

Suggestion: The number of recording channel at the same time is not more than 100; the disc group 

number is not more than 5; the partitions every disc group is not more than 10. 

1.3 Running environment  

The running environment of the Server

Hardware platform requirements

The current dominating configurations of PC (CPU: 1.5G Hz, 512M 

Memory, two partitions). Adding any 1TB storing space needs to add about 25 MB memories; adding one 

recording channel needs to add 2MB memories

Note:  

The index files are very big because the Server adopts the disc pre-allocation technology to store 

the data. The volume of each partition must be less than 5TB, and no more than 3TB is 

recommended; the total size of all the partitions should not exceed 50TB. 

Software requirements

Windows 2K/XP/2003; Access 2003

 

Summary of Contents for DVR-470B

















Reviews: